Solutions
What to fix, with what and how, by roof or façade type: illustrations of each system, installation steps, diagrams and the recommended FYT fasteners.
Sandwich panel roofs and façadesFixing roof and wall sandwich panels to steel purlins, rolled beams, concrete or timber, with double-thread screws that hold the outer sheet without crushing the core.
Profiled sheet roofs and façadesFixing single-skin profiled or corrugated sheets to steel, timber or concrete purlins and beams, and watertight stitching of side laps.
Deck roofs on steel deckMechanical fastening of insulation and waterproofing membrane (PVC, TPO, EPDM or bituminous) to steel deck, with telescopic sleeve + screw systems or screws with stress plates.
Deck roofs on timber decksFastening insulation and membrane to timber or OSB decks with S-point EDS-H screws, on their own or with a telescopic sleeve.
Deck roofs on concreteFastening insulation and membrane to concrete or aerated concrete decks with concrete screws (GBS, EFHD) and sleeves, or with ISPC expansion nails.
Deck roofs with induction weldingFastening the synthetic membrane (TPO or PVC) without penetrating it: induction plates fix the insulation to the deck and are then welded to the underside of the membrane with the induction machine. Suitable for steel, timber or concrete decks.
Ventilated façadeFixing the substructure, insulation and cladding panels of a ventilated façade to brick, block or concrete walls.
Rooftop solar installationWatertight supports for fixing PV structures to roofs waterproofed with PVC, TPO or bituminous membranes, without breaching the waterproofing.