Deck roofs on timber decks
Fastening insulation and membrane to timber or OSB decks with S-point EDS-H screws, on their own or with a telescopic sleeve.
Where it is used. Flat roofs on timber decks, cross-laminated timber (CLT) panels or OSB boards on joists.

How to install
- Lay the vapour barrier and the insulation boards staggered on the deck.
- Fix each insulation board with 6 fasteners: 4 at the corners and 2 in the centre.
- Fix the membrane at the lap with a TLK or TRP sleeve and EDS-H screw, or with an EDS-H screw and stress plate.
- The screw must engage at least 18 mm into the timber.
- Lap the next sheet over and weld it.
Recommended fasteners
Data sheets and DoPs →Sleeve + screw systems
Screw + stress plate
Guidance only. The type, length and number of fasteners depend on the project, the substrate and the wind uplift calculation; please consult us for each project.










