
Metal roofing and cladding · Zinc-plated screws
FYT WAFER
Zinc-plated steel self-drilling screw.
Ø 4.2 × 13–38 mm · 5 item codes
PH2 headSheet stitchingZinc-plated steelReaction to fire A1
FYT WAFER screws are self-drilling screws that drill, tap and fasten in a single operation, for fixing profiles and thin sheets. Their very low head barely protrudes from the outer profile.
- Sizes
- Ø 4.2 × 13–38 mm
- Item codes
- 5
- Head
- PH2
- Catalogue
- Convencional 2025 · p. 50
| Item code | Ø D × L (mm) | E max (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|---|
| 10163W4201300 | 4,2x13 | 3 | 1,0+0,5 | 4 | Ph-2 | 1,000 |
| 10163W4201600 | 4,2x16 | 3 | 1,0+0,5 | 7 | Ph-2 | 1,000 |
| 10163W4201900 | 4,2x19 | 3 | 1,0+0,5 | 10 | Ph-2 | 1,000 |
| 10163W4202500 | 4,2x25 | 3 | 1,0+0,5 | 16 | Ph-2 | 1,000 |
| 10163W4203800 | 4,2x38 | 3 | 1,0+0,5 | 29 | Ph-2 | 1,000 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- E max
- Maximum steel thickness the drill point can drill through.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
5 item codes · data from the 2025 catalogue.
Anti-corrosion coatings
The standard finish is zinc plating. For more aggressive environments the Delta FYT coating is applied: choose according to the environment's corrosivity category (C1 to C5, EN ISO 12944-2). The hours indicate salt spray resistance.
Zinc-plated
Standard · C1-C2
Standard · C1-C2
Delta FYT 450 h
C1-C2-C3
C1-C2-C3
Delta FYT 1,000 h
C1-C2-C3-C4
C1-C2-C3-C4
Delta FYT 1,500 h
C1 a C5
C1 a C5
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
RAL 9010Pyrenees white
RAL 9006Silver metallic
RAL 7035Light grey
RAL 5009Lake blue
RAL 6005Navarra green
RAL 3011Tile red
RAL 8004Copper brown
RAL 1011Brown beige
RAL 1015Bidasoa cream
Sealing washers
Recommended to ensure watertightness and improve pull-over resistance.
| Washer | G16 | G18 | G25 | N16 | N18 | N25 |
|---|---|---|---|---|---|---|
| Item code suffix | +G6 | +G8 | +G5 | +N6 | +N8 | +N5 |
More zinc-plated screws







