
FYT PANEL3
Yellow-passivated self-drilling sandwich panel screw, 8 mm hexagon head and no. 3 drill point.
FYT PANEL3 screws are self-drilling screws that drill, tap and fasten in a single operation, for fixing sandwich panels to steel structures up to 5 mm. They have a secondary thread under the head that holds the panel's outer sheet, and a yellow zinc passivated coating.
- Sizes
- Ø 5.5 × 50–230 mm
- Item codes
- 11
- Head
- Hexagon 8 mm
- Drill point
- Self-drilling P3
- Catalogue
- Convencional 2025 · p. 38
| Item code | Ø D × L (mm) | E max (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|---|
| 1012305505000 | 5,5x50 | 5 | 29 | 36 | 8 | 1,000 |
| 1012305506300 | 5,5x63 | 5 | 29 | 49 | 8 | 1,000 |
| 1012305508200 | 5,5x82 | 5 | 34 | 68 | 8 | 1,000 |
| 1012305509800 | 5,5x98 | 5 | 29 | 84 | 8 | 1,000 |
| 1012305511500 | 5,5x115 | 5 | 27 | 101 | 8 | 1,000 |
| 1012305512500 | 5,5x125 | 5 | 32 | 111 | 8 | 600 |
| 1012305513000 | 5,5x130 | 5 | 34 | 116 | 8 | 600 |
| 1012305515000 | 5,5x150 | 5 | 34 | 136 | 8 | 600 |
| 1012305517500 | 5,5x175 | 5 | 34 | 161 | 8 | 600 |
| 1012305520000 | 5,5x200 | 5 | 34 | 186 | 8 | 600 |
| 1012305523000 | 5,5x230 | 5 | 34 | 216 | 8 | 600 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- E max
- Maximum steel thickness the drill point can drill through.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
11 item codes · data from the 2025 catalogue.
Anti-corrosion coatings
The standard finish is zinc plating. For more aggressive environments the Delta FYT coating is applied: choose according to the environment's corrosivity category (C1 to C5, EN ISO 12944-2). The hours indicate salt spray resistance.
Standard · C1-C2
C1-C2-C3
C1-C2-C3-C4
C1 a C5
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
Sealing washers
Recommended to ensure watertightness and improve pull-over resistance.
| Washer | G16 | G18 | G25 | N16 | N18 | N25 |
|---|---|---|---|---|---|---|
| Item code suffix | +G6 | +G8 | +G5 | +N6 | +N8 | +N5 |
Solutions where it is used
More zinc-plated screws







