
FYT RCH
Zinc-plated steel self-tapping screw, 10 mm hexagon head and AB point.
RCH screws are general-purpose screws that can be used on almost any substrate and normally need pre-drilling. FYT RCH screws have a 10 mm hex head with a 15 mm pressed washer and an extra-sharp point that lets them pierce light steel sections without pre-drilling.
- Sizes
- Ø 6.3 · 7.1 × 13–260 mm
- Item codes
- 21
- Head
- Hexagonal 10 mm
- Drill point
- Sharp (AB)
- Catalogue
- Convencional 2025 · p. 28
| Item code | Ø D × L (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|
| 1010006301300 | 6,3x13 | 0,5+0,5 | 3 | 10 | 1,000 |
| 1010006301900 | 6,3x19 | 0,5+0,5 | 9 | 10 | 1,000 |
| 1010006302500 | 6,3x25 | 0,5+0,5 | 15 | 10 | 1,000 |
| 1010006304000 | 6,3x40 | 0,5+0,5 | 30 | 10 | 1,000 |
| 1010006305000 | 6,3x50 | 0,5+0,5 | 40 | 10 | 1,000 |
| 1010006306000 | 6,3x60 | 0,5+0,5 | 50 | 10 | 1,000 |
| 1010006308000 | 6,3x80 | 0,5+0,5 | 70 | 10 | 1,000 |
| 1010006309000 | 6,3x90 | 0,5+0,5 | 80 | 10 | 1,000 |
| 1010006310000 | 6,3x100 | 0,5+0,5 | 90 | 10 | 1,000 |
| 1010006311000 | 6,3x110 | 0,5+0,5 | 100 | 10 | 1,000 |
| 1010006312000 | 6,3x120 | 0,5+0,5 | 110 | 10 | 1,000 |
| 1010006313000 | 6,3x130 | 0,5+0,5 | 120 | 10 | 1,000 |
| 1010006314000 | 6,3x140 | 0,5+0,5 | 130 | 10 | 1,000 |
| 1010006315000 | 6,3x150 | 0,5+0,5 | 140 | 10 | 1,000 |
| 1010006317000 | 6,3x170 | 0,5+0,5 | 160 | 10 | 1,000 |
| 1010006320000 | 6,3x200 | 0,5+0,5 | 190 | 10 | 1,000 |
| 1010006322000 | 6,3x220 | 0,5+0,5 | 210 | 10 | 1,000 |
| 1010006324000 | 6,3x240 | 0,5+0,5 | 230 | 10 | 1,000 |
| 1010006326000 | 6,3x260 | 0,5+0,5 | 250 | 10 | 1,000 |
| 1010007102500 | 7,1x25 | 0,5+0,5 | 15 | 10 | 1,000 |
| 1010007108000 | 7,1x80 | 0,5+0,5 | 70 | 10 | 1,000 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
21 item codes · data from the 2025 catalogue.
Anti-corrosion coatings
The standard finish is zinc plating. For more aggressive environments the Delta FYT coating is applied: choose according to the environment's corrosivity category (C1 to C5, EN ISO 12944-2). The hours indicate salt spray resistance.
Standard · C1-C2
C1-C2-C3
C1-C2-C3-C4
C1 a C5
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
Sealing washers
Recommended to ensure watertightness and improve pull-over resistance.
| Washer | G16 | G18 | G25 | N16 | N18 | N25 |
|---|---|---|---|---|---|---|
| Item code suffix | +G6 | +G8 | +G5 | +N6 | +N8 | +N5 |
More zinc-plated screws







