
Metal roofing and cladding · Zinc-plated screws
FYT FYTHOR
Concrete screw with 8 mm hexagon head and 1,000 h salt spray coating.
Ø 6.5 × 32–150 mm · 9 item codes
Hexagon 8 mmRequires pre-drillingConcrete beamReaction to fire A1Delta 1,000 h
FYTHOR screws are dedicated concrete screws with an 8 mm hex head. Their twin-start thread gives a better hold in this type of substrate, and they have a 1,000-hour salt spray coating.
- Sizes
- Ø 6.5 × 32–150 mm
- Item codes
- 9
- Head
- Hexagon 8 mm
- Drill point
- With pre-drilling
- Catalogue
- Convencional 2025 · p. 44
| Item code | Ø D × L (mm) | E max (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|---|
| 1015006503200 | 6,5x32 | 25 | 0,5 | 7 | 8 | 1,000 |
| 1015006504500 | 6,5x45 | 25 | 0,5 | 20 | 8 | 1,000 |
| 1015006505700 | 6,5x57 | 25 | 0,5 | 32 | 8 | 1,000 |
| 1015006507000 | 6,5x70 | 25 | 0,5 | 45 | 8 | 1,000 |
| 1015006508200 | 6,5x82 | 25 | 0,5 | 57 | 8 | 1,000 |
| 1015006510000 | 6,5x100 | 25 | 0,5 | 75 | 8 | 1,000 |
| 1015006511500 | 6,5x115 | 25 | 0,5 | 90 | 8 | 1,000 |
| 1015006512500 | 6,5x125 | 25 | 0,5 | 100 | 8 | 1,000 |
| 1015006515000 | 6,5x150 | 25 | 0,5 | 125 | 8 | 1,000 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- E max
- Maximum steel thickness the drill point can drill through.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
9 item codes · data from the 2025 catalogue.
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
RAL 9010Pyrenees white
RAL 9006Silver metallic
RAL 7035Light grey
RAL 5009Lake blue
RAL 6005Navarra green
RAL 3011Tile red
RAL 8004Copper brown
RAL 1011Brown beige
RAL 1015Bidasoa cream
Sealing washers
Recommended to ensure watertightness and improve pull-over resistance.
| Washer | G16 | G18 | G25 | N16 | N18 | N25 |
|---|---|---|---|---|---|---|
| Item code suffix | +G6 | +G8 | +G5 | +N6 | +N8 | +N5 |
Solutions where it is used
More zinc-plated screws







