
Metal roofing and cladding · Zinc-plated screws
FYT DK3P
Zinc-plated steel self-drilling screw, no. 3 drill point.
Ø 3.5 · 3.9 · 4.2 · 4.8 · 5.5 · 6.3 × 13–70 mm · 21 item codes
PH2 headSelf-drilling, no. 3 pointCold-formed steel purlinZinc-plated steelReaction to fire A1
DK3P screws are self-drilling screws that drill, tap and fasten in a single operation, with a flat countersunk head, for joints where the head must sit flush with the surface.
- Sizes
- Ø 3.5 · 3.9 · 4.2 · 4.8 · 5.5 · 6.3 × 13–70 mm
- Item codes
- 21
- Head
- PH2
- Drill point
- Self-drilling P3
- Catalogue
- Convencional 2025 · p. 48
| Item code | Ø D × L (mm) | E max (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|---|
| 10163P3501600 | 3,5x16 | 3 | 1,0+0,5 | 11 | Ph-2 | 1,000 |
| 10163P3502500 | 3,5x25 | 3 | 1,0+0,5 | 20 | Ph-2 | 1,000 |
| 10163P3901600 | 3,9x16 | 3 | 1,0+0,5 | 11 | Ph-2 | 1,000 |
| 10163P3901900 | 3,9x19 | 3 | 1,0+0,5 | 14 | Ph-2 | 1,000 |
| 10163P3902500 | 3,9x25 | 3 | 1,0+0,5 | 20 | Ph-2 | 1,000 |
| 10163P3903200 | 3,9x32 | 3 | 1,0+0,5 | 27 | Ph-2 | 1,000 |
| 10163P4201300 | 4,2x13 | 3 | 1,0+0,5 | 7 | Ph-2 | 1,000 |
| 10163P4201600 | 4,2x16 | 3 | 1,0+0,5 | 10 | Ph-2 | 1,000 |
| 10163P4201900 | 4,2x19 | 3 | 1,0+0,5 | 13 | Ph-2 | 1,000 |
| 10163P4202500 | 4,2x25 | 3 | 1,0+0,5 | 19 | Ph-2 | 1,000 |
| 10163P4203200 | 4,2x32 | 3 | 1,0+0,5 | 26 | Ph-2 | 1,000 |
| 10163P4801900 | 4,8x19 | 4 | 1,0+0,5 | 11 | Ph-2 | 1,000 |
| 10163P4802500 | 4,8x25 | 4 | 1,0+0,5 | 17 | Ph-2 | 1,000 |
| 10163P4803200 | 4,8x32 | 4 | 1,0+0,5 | 24 | Ph-2 | 1,000 |
| 10163P4803800 | 4,8x38 | 4 | 1,0+0,5 | 30 | Ph-2 | 1,000 |
| 10163P4804500 | 4,8x45 | 4 | 1,0+0,5 | 37 | Ph-2 | 1,000 |
| 10163P4805000 | 4,8x50 | 4 | 1,0+0,5 | 42 | Ph-2 | 1,000 |
| 10163P5503800 | 5,5x38 | 5 | 1,5+0,5 | 28 | Ph-2 | 1,000 |
| 10163P5506000 | 5,5x60 | 5 | 1,5+0,5 | 50 | Ph-2 | 1,000 |
| 10163P5507000 | 5,5x70 | 5 | 1,5+0,5 | 60 | Ph-2 | 1,000 |
| 10163P6307000 | 6,3x70 | 5 | 1,5+0,5 | 58 | Ph-2 | 1,000 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- E max
- Maximum steel thickness the drill point can drill through.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
21 item codes · data from the 2025 catalogue.
Anti-corrosion coatings
The standard finish is zinc plating. For more aggressive environments the Delta FYT coating is applied: choose according to the environment's corrosivity category (C1 to C5, EN ISO 12944-2). The hours indicate salt spray resistance.
Zinc-plated
Standard · C1-C2
Standard · C1-C2
Delta FYT 450 h
C1-C2-C3
C1-C2-C3
Delta FYT 1,000 h
C1-C2-C3-C4
C1-C2-C3-C4
Delta FYT 1,500 h
C1 a C5
C1 a C5
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
RAL 9010Pyrenees white
RAL 9006Silver metallic
RAL 7035Light grey
RAL 5009Lake blue
RAL 6005Navarra green
RAL 3011Tile red
RAL 8004Copper brown
RAL 1011Brown beige
RAL 1015Bidasoa cream
Washers
This screw is fitted without sealing washer.
- FTData sheet
10163P35 FYT DK3P 3,5.pdfPDF - FTData sheet
10163P39 FYT DK3P 3,9.pdfPDF - FTData sheet
10163P42 FYT DK3P 4,2.pdfPDF - FTData sheet
10163P48 FYT DK3P 4,8.pdfPDF - FTData sheet
10163P55 FYT DK3P 5,5.pdfPDF - FTData sheet
10163P63 FYT DK3P 6,3.pdfPDF - DoPDeclaration of Performance
DOP 10163P48 FYT DK3P 4,8.pdfPDF - DoPDeclaration of Performance
DOP 10163P55 FYT DK3P 5,5.pdfPDF - DoPDeclaration of Performance
DOP 10163P35 FYT DK3P 3,5.pdfPDF - DoPDeclaration of Performance
DOP 10163P39 FYT DK3P 3,9.pdfPDF - DoPDeclaration of Performance
DOP 10163P42 FYT DK3P 4,2.pdfPDF - DoPDeclaration of Performance
DOP 10163P63 FYT DK3P 6,3.pdfPDF
More zinc-plated screws







