
Metal roofing and cladding · Zinc-plated screws
FYT DK3N
Zinc-plated steel self-drilling screw, no. 3 drill point.
Ø 3.5 · 3.9 · 4.2 · 4.8 · 5.5 × 9.5–120 mm · 31 item codes
PH2 headSelf-drilling, no. 3 pointCold-formed steel purlinZinc-plated steelReaction to fire A1
DK3N screws are self-drilling screws that drill, tap and fasten in a single operation, with a Phillips pan head, for joining profiles and accessories where the head should be discreet.
- Sizes
- Ø 3.5 · 3.9 · 4.2 · 4.8 · 5.5 × 9.5–120 mm
- Item codes
- 31
- Head
- PH2
- Drill point
- Self-drilling P3
- Catalogue
- Convencional 2025 · p. 46
| Item code | Ø D × L (mm) | E max (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|---|
| 10163N3501300 | 3,5x13 | 3 | 1,0+0,5 | 3 | Ph-2 | 1,000 |
| 10163N3501600 | 3,5x16 | 3 | 1,0+0,5 | 6 | Ph-2 | 1,000 |
| 10163N3501900 | 3,5x19 | 3 | 1,0+0,5 | 14 | Ph-2 | 1,000 |
| 10163N3502500 | 3,5x25 | 3 | 1,0+0,5 | 20 | Ph-2 | 1,000 |
| 10163N3509500 | 3,5x9,5 | 3 | 1,0+0,5 | 90 | Ph-2 | 1,000 |
| 10163N3901300 | 3,9x13 | 3 | 1,0+0,5 | 8 | Ph-2 | 1,000 |
| 10163N3901600 | 3,9x16 | 3 | 1,0+0,5 | 11 | Ph-2 | 1,000 |
| 10163N3901900 | 3,9x19 | 3 | 1,0+0,5 | 14 | Ph-2 | 1,000 |
| 10163N4201300 | 4,2x13 | 3 | 1,0+0,5 | 7 | Ph-2 | 1,000 |
| 10163N4201600 | 4,2x16 | 3 | 1,0+0,5 | 10 | Ph-2 | 1,000 |
| 10163N4201900 | 4,2x19 | 3 | 1,0+0,5 | 13 | Ph-2 | 1,000 |
| 10163N4203200 | 4,2x32 | 3 | 1,0+0,5 | 26 | Ph-2 | 1,000 |
| 10163N4801300 | 4,8x13 | 4 | 1,5+0,5 | 5 | Ph-2 | 1,000 |
| 10163N4801600 | 4,8x16 | 4 | 1,5+0,5 | 8 | Ph-2 | 1,000 |
| 10163N4801900 | 4,8x19 | 4 | 1,5+0,5 | 11 | Ph-2 | 1,000 |
| 10163N4802500 | 4,8x25 | 4 | 1,5+0,5 | 17 | Ph-2 | 1,000 |
| 10163N4803200 | 4,8x32 | 4 | 1,5+0,5 | 24 | Ph-2 | 1,000 |
| 10163N4803800 | 4,8x38 | 4 | 1,5+0,5 | 30 | Ph-2 | 1,000 |
| 10163N4804500 | 4,8x45 | 4 | 1,5+0,5 | 37 | Ph-2 | 1,000 |
| 10163N4805000 | 4,8x50 | 4 | 1,5+0,5 | 42 | Ph-2 | 1,000 |
| 10163N4806000 | 4,8x60 | 4 | 1,5+0,5 | 52 | Ph-2 | 1,000 |
| 10163N4807000 | 4,8x70 | 4 | 1,5+0,5 | 62 | Ph-2 | 1,000 |
| 10163N4808000 | 4,8x80 | 4 | 1,5+0,5 | 72 | Ph-2 | 1,000 |
| 10163N4812000 | 4,8x120 | 4 | 1,5+0,5 | 112 | Ph-2 | 1,000 |
| 10163N5501900 | 5,5x19 | 5 | 1,5+0,5 | 9 | Ph-2 | 1,000 |
| 10163N5502200 | 5,5x22 | 5 | 1,5+0,5 | 12 | Ph-2 | 1,000 |
| 10163N5502500 | 5,5x25 | 5 | 1,5+0,5 | 15 | Ph-2 | 1,000 |
| 10163N5503200 | 5,5x32 | 5 | 1,5+0,5 | 22 | Ph-2 | 1,000 |
| 10163N5503800 | 5,5x38 | 5 | 1,5+0,5 | 28 | Ph-2 | 1,000 |
| 10163N5505000 | 5,5x50 | 5 | 1,5+0,5 | 40 | Ph-2 | 1,000 |
| 10163N5506000 | 5,5x60 | 5 | 1,5+0,5 | 50 | Ph-2 | 1,000 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- E max
- Maximum steel thickness the drill point can drill through.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
31 item codes · data from the 2025 catalogue.
Anti-corrosion coatings
The standard finish is zinc plating. For more aggressive environments the Delta FYT coating is applied: choose according to the environment's corrosivity category (C1 to C5, EN ISO 12944-2). The hours indicate salt spray resistance.
Zinc-plated
Standard · C1-C2
Standard · C1-C2
Delta FYT 450 h
C1-C2-C3
C1-C2-C3
Delta FYT 1,000 h
C1-C2-C3-C4
C1-C2-C3-C4
Delta FYT 1,500 h
C1 a C5
C1 a C5
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
RAL 9010Pyrenees white
RAL 9006Silver metallic
RAL 7035Light grey
RAL 5009Lake blue
RAL 6005Navarra green
RAL 3011Tile red
RAL 8004Copper brown
RAL 1011Brown beige
RAL 1015Bidasoa cream
Sealing washers
Recommended to ensure watertightness and improve pull-over resistance.
| Washer | G16 | G18 | G25 | N16 | N18 | N25 |
|---|---|---|---|---|---|---|
| Item code suffix | +G6 | +G8 | +G5 | +N6 | +N8 | +N5 |
- FTData sheet
10163N35 FYT DK3N 3,5.pdfPDF - FTData sheet
10163N39 FYT DK3N 3,9.pdfPDF - FTData sheet
10163N42 FYT DK3N 4,2.pdfPDF - FTData sheet
10163N48 FYT DK3N 4,8 .pdfPDF - FTData sheet
10163N55 FYT DK3N 5,5.pdfPDF - DoPDeclaration of Performance
DOP 10163N42 FYT DK3N 4,2.pdfPDF - DoPDeclaration of Performance
DOP 10163N48 FYT DK3N 4,8.pdfPDF - DoPDeclaration of Performance
DOP 10163N55 FYT DK3N 5,5.pdfPDF - DoPDeclaration of Performance
DOP 10163N35 FYT DK3N 3,5.pdfPDF - DoPDeclaration of Performance
DOP 10163N39 FYT DK3N 3,9.pdfPDF
More zinc-plated screws







