
Metal roofing and cladding · Zinc-plated screws
FYT DK1
Zinc-plated steel self-drilling screw, 8 mm hexagon head and no. 1 drill point.
Ø 4.8 · 6.3 × 19–60 mm · 7 item codes
Hexagon 8 mmSelf-drilling, no. 1 point · reducedSheet stitchingZinc-plated steelReaction to fire A1
FYT DK1 screws are hex head self-drilling screws with a reduced point for stitching laps and thin steel.
- Sizes
- Ø 4.8 · 6.3 × 19–60 mm
- Item codes
- 7
- Head
- Hexagon 8 mm
- Drill point
- Reduced drill point
- Catalogue
- Convencional 2025 · p. 30
| Item code | Ø D × L (mm) | E max (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|---|
| 1011104801900 | 4,8x19 | 1,5 | 0,5+0,5 | 4 | 8 | 1,000 |
| 1011106302000 | 6,3x20 | 2,5 | 0,5+0,5 | 5 | 8 | 1,000 |
| 1011106302500 | 6,3x25 | 2,5 | 0,5+0,5 | 10 | 8 | 1,000 |
| 1011106303200 | 6,3x32 | 2,5 | 0,5+0,5 | 17 | 8 | 1,000 |
| 1011106303800 | 6,3x38 | 2,5 | 0,5+0,5 | 23 | 8 | 1,000 |
| 1011106305000 | 6,3x50 | 2,5 | 0,5+0,5 | 35 | 8 | 1,000 |
| 1011106306000 | 6,3x60 | 2,5 | 0,5+0,5 | 45 | 8 | 1,000 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- E max
- Maximum steel thickness the drill point can drill through.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
7 item codes · data from the 2025 catalogue.
Anti-corrosion coatings
The standard finish is zinc plating. For more aggressive environments the Delta FYT coating is applied: choose according to the environment's corrosivity category (C1 to C5, EN ISO 12944-2). The hours indicate salt spray resistance.
Zinc-plated
Standard · C1-C2
Standard · C1-C2
Delta FYT 450 h
C1-C2-C3
C1-C2-C3
Delta FYT 1,000 h
C1-C2-C3-C4
C1-C2-C3-C4
Delta FYT 1,500 h
C1 a C5
C1 a C5
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
RAL 9010Pyrenees white
RAL 9006Silver metallic
RAL 7035Light grey
RAL 5009Lake blue
RAL 6005Navarra green
RAL 3011Tile red
RAL 8004Copper brown
RAL 1011Brown beige
RAL 1015Bidasoa cream
Sealing washers
Recommended to ensure watertightness and improve pull-over resistance.
| Washer | G16 | G18 | G25 | N16 | N18 | N25 |
|---|---|---|---|---|---|---|
| Item code suffix | +G6 | +G8 | +G5 | +N6 | +N8 | +N5 |
- FTData sheet
10111048 FYT DK1 4,8.pdfPDF - FTData sheet
10111063 FYT DK1 6,3 MADERA.pdfPDF - FTData sheet
10111063 FYT DK1 6,3.pdfPDF - DoPDeclaration of Performance
DOP 10111048 FYT DK1 4,8.pdfPDF - DoPDeclaration of Performance
DOP 10111063 FYT DK1 6,3 MADERA.pdfPDF - DoPDeclaration of Performance
DOP 10111063 FYT DK1 6,3.pdfPDF
Solutions where it is used
More zinc-plated screws







