
FYT ALAS3
Zinc-plated steel self-drilling screw, no. 3 drill point.
FYT ALAS3 screws are self-drilling screws that drill, tap and fasten in a single operation, for fixing timber to steel structures up to 5 mm. The wings on the point ream a hole in the timber so the screw does not overheat, then break off on reaching the metal so the thread can grip the steel.
- Sizes
- Ø 4.8 · 5.5 · 6.3 × 25–130 mm
- Item codes
- 9
- Head
- PH2
- Drill point
- Self-drilling P3
- Catalogue
- Convencional 2025 · p. 62
| Item code | Ø D × L (mm) | E max (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|---|
| 10193P4802500 | 4,8x25 | 3,5 | 1,00*+1,00 | 10 | Ph-2 | 1,000 |
| 10193P4803200 | 4,8x32 | 3,5 | 1,00*+1,00 | 17 | Ph-2 | 1,000 |
| 10193P4803800 | 4,8x38 | 3,5 | 1,00*+1,00 | 23 | Ph-2 | 1,000 |
| 10193P4804500 | 4,8x45 | 3,5 | 1,00*+1,00 | 30 | Ph-2 | 1,000 |
| 10193P5505000 | 5,5x50 | 5 | 1,00*+1,00 | 35 | Ph-2 | 1,000 |
| 10193P5505500 | 5,5x55 | 5 | 1,00*+1,00 | 40 | Ph-2 | 1,000 |
| 10193P5506000 | 5,5x60 | 5 | 1,00*+1,00 | 45 | Ph-2 | 1,000 |
| 10193P5513000 | 5,5x130 | 5 | 1,00*+1,00 | 115 | Ph-2 | 1,000 |
| 10193P6307000 | 6,3x70 | 5 | 1,00*+1,00 | 55 | Ph-2 | 1,000 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- E max
- Maximum steel thickness the drill point can drill through.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
9 item codes · data from the 2025 catalogue.
Anti-corrosion coatings
The standard finish is zinc plating. For more aggressive environments the Delta FYT coating is applied: choose according to the environment's corrosivity category (C1 to C5, EN ISO 12944-2). The hours indicate salt spray resistance.
Standard · C1-C2
C1-C2-C3
C1-C2-C3-C4
C1 a C5
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
Washers
This screw is fitted without sealing washer.
- FTData sheet
10193P48 FYT ALAS3 4,8.pdfPDF - FTData sheet
10193P55 FYT ALAS3 5,5.pdfPDF - FTData sheet
10193P63 FYT ALAS3 6,3.pdfPDF - DoPDeclaration of Performance
DOP 10193P48 FYT ALAS3 4,8.pdfPDF - DoPDeclaration of Performance
DOP 10193P55 FYT ALAS3 5,5.pdfPDF - DoPDeclaration of Performance
DOP 10193P63 FYT ALAS3 6,3.pdfPDF
More zinc-plated screws







