
Metal roofing and cladding · Stainless steel screws
i-FYT EXP
A2 stainless steel self-drilling screw.
Ø 4.2 × 14–22 mm · 2 item codes
PH2 headDrills through aluminiumStainless A2 · AISI 304Reaction to fire A1
EXP screws are self-drilling screws that drill, tap and fasten in a single operation, with an extra-flat head. i-FYT screws are 100% A2 stainless steel, so they are only recommended for joining aluminium profiles.
- Sizes
- Ø 4.2 × 14–22 mm
- Item codes
- 2
- Head
- PH2
- Catalogue
- Convencional 2025 · p. 22
| Item code | Ø D × L (mm) | E max (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|---|
| 02163X4201400 | 4,2x14 | 3 | 1,0+0,5 | 4 | Ph | 1,000 |
| 02163X4202200 | 4,2x22 | 3 | 1,0+0,5 | 12 | Ph | 1,000 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- E max
- Maximum steel thickness the drill point can drill through.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
2 item codes · data from the 2025 catalogue.
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
RAL 9010Pyrenees white
RAL 9006Silver metallic
RAL 7035Light grey
RAL 5009Lake blue
RAL 6005Navarra green
RAL 3011Tile red
RAL 8004Copper brown
RAL 1011Brown beige
RAL 1015Bidasoa cream
Stainless steel sealing washers
These screws are used with washers made of stainless steel with EPDM seal (i-FYT WASHER range), to ensure watertightness, prevent galvanic corrosion and improve pull-over resistance.
| Washer | G16 | G18 | G25 | N16 | N18 | N25 |
|---|---|---|---|---|---|---|
| Item code suffix | +G6 | +G8 | +G5 | +N6 | +N8 | +N5 |
Solutions where it is used
More in Stainless steel screws





