
Bi-FYT PANEL3
Bi-metal self-drilling screw (stainless steel with carbon steel point), 8 mm hexagon head and no. 3 drill point.
Bi-FYT PANEL3 screws are self-drilling screws that drill, tap and fasten in a single operation, for fixing sandwich panels to steel structures up to 5 mm, with a secondary thread under the head to hold the panel's outer sheet. The Bi-FYT range is bi-metal: an A2 stainless steel body with a hardened steel point, so it drills steel while keeping the corrosion resistance of stainless.
- Sizes
- Ø 5.5 × 50–230 mm
- Item codes
- 11
- Head
- Hexagon 8 mm
- Drill point
- Self-drilling P3
- Catalogue
- Convencional 2025 · p. 92
| Item code | Ø D × L (mm) | E max (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|---|
| 1112305505000 | 5,5x50 | 5 | 29 | 36 | 8 | 1,000 |
| 1112305506300 | 5,5x63 | 5 | 29 | 49 | 8 | 1,000 |
| 1112305508200 | 5,5x82 | 5 | 34 | 68 | 8 | 1,000 |
| 1112305509800 | 5,5x98 | 5 | 29 | 84 | 8 | 1,000 |
| 1112305511500 | 5,5x115 | 5 | 27 | 101 | 8 | 1,000 |
| 1112305512500 | 5,5x125 | 5 | 32 | 111 | 8 | 600 |
| 1112305513000 | 5,5x130 | 5 | 34 | 116 | 8 | 600 |
| 1112305515000 | 5,5x150 | 5 | 34 | 136 | 8 | 600 |
| 1112305517500 | 5,5x175 | 5 | 34 | 161 | 8 | 600 |
| 1112305520000 | 5,5x200 | 5 | 34 | 186 | 8 | 600 |
| 1112305523000 | 5,5x230 | 5 | 34 | 216 | 8 | 600 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- E max
- Maximum steel thickness the drill point can drill through.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
11 item codes · data from the 2025 catalogue.
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
Stainless steel sealing washers
These screws are used with washers made of stainless steel with EPDM seal (i-FYT WASHER range), to ensure watertightness, prevent galvanic corrosion and improve pull-over resistance.
| Washer | G16 | G18 | G25 | N16 | N18 | N25 |
|---|---|---|---|---|---|---|
| Item code suffix | +G6 | +G8 | +G5 | +N6 | +N8 | +N5 |
- ETAEuropean Technical Assessment
Varies by manufacturer · ask our technical departmentRequest - FTData sheet
11123055 Bi-FYT PANEL3 5,5 A4.pdfPDF - FTData sheet
11123055 Bi-FYT PANEL3 5,5.pdfPDF - DoPDeclaration of Performance
DOP 11123055 Bi-FYT PANEL3 5,5 A4.pdfPDF - DoPDeclaration of Performance
DOP 11123055 Bi-FYT PANEL3 5,5.pdfPDF
Solutions where it is used
More in Bi-metal screws






