
Metal roofing and cladding · Bi-metal screws
Bi-FYT DK1
Bi-metal self-drilling screw (stainless steel with carbon steel point), 8 mm hexagon head and no. 1 drill point.
Ø 4.8 · 4.9 · 5.5 · 6.3 × 20–25 mm · 5 item codes
Hexagon 8 mmSelf-drilling, no. 1 point · reducedSheet stitchingBi-metal: stainless steel + carbon steel pointReaction to fire A1CE markingEuropean Technical Assessment (ETA)
Bi-FYT DK1 screws are self-drilling screws that drill, tap and fasten in a single operation, with a hex head and reduced point for stitching laps and steel up to 2 mm. The Bi-FYT range is bi-metal: an A2 stainless steel body with a hardened steel point, so it drills steel while keeping the corrosion resistance of stainless.
- Sizes
- Ø 4.8 · 4.9 · 5.5 · 6.3 × 20–25 mm
- Item codes
- 5
- Head
- Hexagon 8 mm
- Drill point
- Reduced drill point
- Catalogue
- Convencional 2025 · p. 84
| Item code | Ø D × L (mm) | E max (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|---|
| 1111104802200 | 4,8x22 | 1,5 | 0,5+0,5 | 7 | 8 | 1,000 |
| 1111104902000 | 4,9x20 | 1,5 | 0,5+0,5 | 5 | 8 | 1,000 |
| 1111105502200 | 5,5x22 | 2,0 | 0,5+0,5 | 7 | 8 | 1,000 |
| 1111105502500 | 5,5x25 | 2,0 | 0,5+0,5 | 10 | 8 | 1,000 |
| 1111106302500 | 6,3x25 | 2,0 | 0,5+0,5 | 10 | 8 | 1,000 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- E max
- Maximum steel thickness the drill point can drill through.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
5 item codes · data from the 2025 catalogue.
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
RAL 9010Pyrenees white
RAL 9006Silver metallic
RAL 7035Light grey
RAL 5009Lake blue
RAL 6005Navarra green
RAL 3011Tile red
RAL 8004Copper brown
RAL 1011Brown beige
RAL 1015Bidasoa cream
Stainless steel sealing washers
These screws are used with washers made of stainless steel with EPDM seal (i-FYT WASHER range), to ensure watertightness, prevent galvanic corrosion and improve pull-over resistance.
| Washer | G16 | G18 | G25 | N16 | N18 | N25 |
|---|---|---|---|---|---|---|
| Item code suffix | +G6 | +G8 | +G5 | +N6 | +N8 | +N5 |
- ETAEuropean Technical Assessment
Varies by manufacturer · ask our technical departmentRequest - FTData sheet
11111048 Bi-FYT DK1 4,8.pdfPDF - FTData sheet
11111049 Bi-FYT DK1 4,9 MADERA.pdfPDF - FTData sheet
11111049 Bi-FYT DK1 4,9.pdfPDF - FTData sheet
11111055 Bi-FYT DK1 5,5.pdfPDF - FTData sheet
11111063 Bi-FYT DK1 6,3.pdfPDF - DoPDeclaration of Performance
DOP 11111049 Bi-FYT DK1 4,9 MADERA.pdfPDF - DoPDeclaration of Performance
DOP 11111049 Bi-FYT DK1 4,9.pdfPDF - DoPDeclaration of Performance
DOP 11111055 Bi-FYT DK1 5,5.pdfPDF - DoPDeclaration of Performance
DOP 11111063 Bi-FYT DK1 6,3.pdfPDF
Solutions where it is used
More in Bi-metal screws






