
DELTA-FYT PANEL3 CE
Self-drilling screw with Delta FYT coating and CE marking, 8 mm hexagon head and no. 3 drill point.
DELTA-FYT PANEL3 screws are self-drilling screws that drill, tap and fasten in a single operation, for fixing sandwich panels to steel structures up to 6 mm, with a secondary thread under the head to hold the panel's outer sheet. Delta FYT organic coating, available with 450, 1,000 and up to 1,500 hours of salt spray resistance; CE marked.
- Sizes
- Ø 5.5 × 65–275 mm
- Item codes
- 10
- Head
- Hexagon 8 mm
- Drill point
- Self-drilling P3
- Catalogue
- Convencional 2025 · p. 78
| Item code | Ø D × L (mm) | E max (mm) | H min (mm) | H max (mm) | Head (mm) | Box quantity (pcs) |
|---|---|---|---|---|---|---|
| 3012315506500 | 5,5x65 | 6 | 30 | 47 | 8 | 1,200 |
| 3012315508000 | 5,5x80 | 6 | 30 | 62 | 8 | 1,200 |
| 3012315509000 | 5,5x90 | 6 | 40 | 72 | 8 | 1,200 |
| 3012315511000 | 5,5x110 | 6 | 60 | 92 | 8 | 600 |
| 3012315512500 | 5,5x125 | 6 | 75 | 107 | 8 | 600 |
| 3012315515000 | 5,5x150 | 6 | 100 | 132 | 8 | 600 |
| 3012315517500 | 5,5x175 | 6 | 125 | 157 | 8 | 600 |
| 3012315520000 | 5,5x200 | 6 | 150 | 182 | 8 | 600 |
| 3012315523000 | 5,5x230 | 6 | 160 | 212 | 8 | 600 |
| 3012315527500 | 5,5x275 | 6 | 205 | 257 | 8 | 600 |
- Ø D × L
- Thread diameter × length of the screw, measured under the head.
- E max
- Maximum steel thickness the drill point can drill through.
- H min
- Minimum thickness of the parts to be joined (for example, 1.0 + 0.5 mm). On panel screws, the unthreaded section allows thinner panels.
- H max
- Maximum thickness of the build-up that can be fixed to the substrate: sheet, insulation or panel.
- Head
- Head size or drive type (socket in mm, Phillips or Torx).
- Box quantity
- Pieces per box.
10 item codes · data from the 2025 catalogue.
Colour-coated
Head colour-coated to the colour chart or to the colour you specify (RAL or sample).
Sealing washers
Recommended to ensure watertightness and improve pull-over resistance. These screws can also be supplied with special washers (stainless, larger diameter or other EPDM thicknesses); ask our technical department.
| Washer | G16 | G18 | G25 | N16 | N18 | N25 |
|---|---|---|---|---|---|---|
| Item code suffix | +G6 | +G8 | +G5 | +N6 | +N8 | +N5 |
Solutions where it is used
More in CE screws (DELTA-FYT)





